A Protective Lining for Abrasion Resistant Service

View Product Literature

About ChemLINE® 2400

ChemLINE® 2400 is an abrasion resistant two component ambient or lower temperature force cured polymer lining system. ChemLINE® 2400 is a tough, flexible lining designed to handle the abrasiveness of coal, ore, plastic pellets, slurries and other media.

ChemLINE® 2400 has excellent chemical resistance capable of withstanding the corrosive attack that normally comes with media handled.

Chemical Resistance

Sulfuric acid to 98%, most solvents including methylene chloride, MEK, methanol, gasohol, distilled water, inorganic acids, dilute organic acids and alkalis. Ideal for corrosive vapor environments.

Industry Applications

  • Hopper cars
  • Slurry pipe
  • Legs of oil platforms
  • Pumps
  • Coal chutes
  • Bag houses
  • Ion exchange vessels

Application Highlights

  • Can be applied to pitted and corroded steel surfaces
  • Very high abrasion resistance
  • Ambient or lower temperature forced air cure
  • Low VOC - 100 grams/L (0.83 lbs.per gallon)
  • Excellent adhesion
  • Good flexibility and toughness
  • Field repairable
  • Steam cleanable
  • Complies with all FDA regulations
  • Resists hydroblasting
  • Dry heat resistance up to 400°F (204°C)

For product recommendations and technical, application and heat curing information contact Advanced Polymer Coatings'
customer service. Contact +01 440-937-6218.


Abrasion Resistance

chemline-2400-resistance-chart


Typical Properties

Stock Colors Gray
V.O.C. Level/Gal. 100 grams/L (0.83 lbs./gal.)
Lead Content Zero
Chromate Content Zero
Pot Life 30 minutes @ 75°F (24°C)
Viscosity Reduction Reduce with Toluene or Xylene
Solids by Volume 89%
Recommended Film Thickness (dry) mils average Steel: 16 mils (400 microns)
Concrete: 24 mils (600 microns)
Shelf Life 12 months

Superior Corrosion and Erosion Resistance Performance

This is Only A Reference Guide

This is an abbreviated listing of the more than 5,000 chemicals that have been tested. This information is intended to serve as a reference guide only. The end user is responsible for determining if ChemLINE® is the appropriate coating for the specific application involved. Contact your ChemLINE® Representative or the ChemLINE® Customer Service Hotline +01 440-937-6218 for detailed specifications prior to any final coatings recommendation or application.

 

 
ChemLINE®
Vinyl Ester
Epoxy (Hibuild)
Rubber
Phenolic (Hibake)
Acetone
A
N
N
N
A
Ammonium Chloride
A
A
A
A
L
Ammonium Hydroxide
A
A
A
A
L
Benzene
A
A
N
N
A
Black Liquor (Paper)
A
A
A
A
L
Bromine Water
A
N
N
N
L
Carbon Tetrachloride
A
A
N
N
A
Chlorine Water
A
A
N
A
N
Chlorobenzene
A
A
A
N
N
Chromic Acid, 20%
A
N
N
A
L
Dichlorobenze
A
N
N
N
Dimethylformamide
A
N
N
N
A
Ethanol
A
A
A
L
A
Formaldehyde
A
A
A
N
A
Furfural Alcohol
A
L
N
N
A
Gasoline
A
A
A
N
A
Hydraulic Oil
A
A
L
L
A
Hydrochloric Acid, 0-37%
A
A
A
A
L
Hydrofluoric Acid, 40%
A
N
N
N
Hydrofluorosilic Acid
A
L
L
L
L
Jet Fuel
A
A
A
L
A
Kerosene
A
A
A
L
A
Latex
A
L
L
N
A
Methanol
A
L
N
N
A
Methylene Chloride
A
N
N
N
A
MEK
A
L
N
N
A
MIBK
A
L
N
N
A
Nickel Plating
A
A
A
---
A
Slurries
A
L
L
L
L
Sodium Chloride
A
A
A
A
A
Sodium Dichromate
A
L
N
A
N
Sodium Hydroxide
A
N
L
A
N
Sulfite Liquor (Paper)
A
A
A
A
A
Sulfuric Acid, 0-98%
A
N
N
A
A
Tallow
A
N
N
N
A
Toluene
A
A
A
N
A
Trichloroethyle
A
N
N
N
---
White Liquor (Paper)
A
A
A
L
A

 

A = Good at ambient temperatures L = Limited Service N = Not recommended — = No information

Join the millions of people using Advanced Polymer Coatings to protect their assets

Talk to Us